Ndier 3-in-1 Soil Moisture Meter, Light and pH / acidity Meter Plant Tester, Helpful for Garden, Farm, Lawn, Indoor & Outdoor (Green)

• Multi-function – Gardeners can conveniently test the soil’s moisture, light, and pH levels with the handy 3-Way Meter.
• No Batteries Required: Simply push the meter into the soil and you’ll get your reading. There’s no need for batteries.
• Indoor & Outdoor Use: Let you know when to water, adjust pH, or change lighting for your garden, flowers, plants both indoor and outdoor.
• Moisture readings register on a scale of 1 (dry) to 10 (moist), light readings range from 0 (low light) to 2000 (very strong light), and pH readings range between pH 3.5 (acidic) and pH 8 (basic).
• Dimension: Approx. 11”×8”×2”, high quality. 1 year guarantee.

Ndier 3-In-1 Soil Moisture Meter, pH meter, and light sensor will help you test any soil, let you know your soil more clear and care your plants more rational, help your garden grow.

Promotes Healthy Plants:
1. Let you know when to water. Dry and needs water or wet and could use a day to dry out. You will never over/under water your plants again.
2. Help you to control Ph level in soil, acidic or alkaline is suitable for your plants, and you will never plant your lovely flowers into high-acid or extreme alkalinity soil.
3. Help you to determine if plant getting adequate light.

Steps of Use:
✔Step 1: Switch moisture/pH/light position
✔Step 2: Stick the probe into the soil about 2-4 inches
✔Step 3: Adjust the position of the probe until the pointer on the dial swing slightly
✔Step 4: After several minutes, Note moisture/pH/light level in the dial
✔Step 5: Remove probe from soil and wipe clean after each use

Specifications:
✔pH Range: 3.5-8 Ph (3.5-6.5 ACID, 7 NOR, 7-8 ALKALI)
✔Moisture Range: 1-10 (1-3 DRY, 4-7 NOR, 8-10 WET)
✔Relative Light: 0-2000 lux (0-200 LOW, 200-500LOW+, 500-1000 NOR 1000-2000 HGH)

Note:
● Use fine sandpaper lightly sand the probes so that keep clean and dry and then use
● Don’t touch the stone or hard objects since it will be easy to damage the probe.
● Don’t test the water for a long time, in case it may damage probe.
● Don’t touch fire and stay away from children.
● Remove probe from soil and wipe clean after each use.